RAMSET 00022 Use and Care Manual download pdf (Page 2)

WARRANTY

ALL WARRANTIES OF THE PRODUCTS DESCRIBED HEREIN, EXPRESSED OR

IMPLIED, INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS

FOR PARTICULAR PURPOSES ARE SPECIFICALLY EXCLUDED, EXCEPT FOR THE

FOLLOWING: ITW BRANDS WILL REPAIR OR REPLACE AT ITS SOLE OPTION

ANY TOOL PART OR FASTENER WHICH WITHIN 90 DAYS AFTER SALE BY

ITW BRANDS IS FOUND BY ITW BRANDS TO BE DEFECTIVE IN MATERIAL OR

WORKMANSHIP, NORMAL WEAR AND TEAR EXCLUDED. THIS IS THE SOLE

WARRANTY OF ITW BRANDS AND THE SOLE REMEDY AVAILABLE TO THE BUYER.

For warranty returns contact: ITW Brands, Attn: QA Department,

1575 Hunter Road, Suite A, Hanover Park, IL 60133; Phone: (877) 489-2726.

NOTE: It is very important that the operator of this tool completely reads and

understands the entire tool manual and completes the Operator's Exam on the last

page. The warranty will not be valid until the test is received, along with a copy

of your sales receipt, and reviewed by ITW Brands. Operator's license can also

be obtained at: www.ramset.com

TO AVOID SERIOUS INJURY OR DEATH

Operators and bystanders

must wear eye and hearing

protection.

Never close tool with hand over fastener loading end of the tool.

A serious hand injury from penetration by the piston or a

discharged fastener could result.

Read manual before

operating tool.

THIS TOOL IS FOR USE ONLY BY LICENSED OPERATORS.

YOU MUST OBTAIN A LICENSE BEFORE USING IT. A

TOOL OPERATOR'S CARD WILL BE ISSUED TO YOU

AFTER SUCCESSFULLY COMPLETING THE ENCLOSED

EXAM AND RETURNING IT TO RECEIVE YOUR CARD

AND ACTIVATE YO UR WARR ANTY. OPERATOR'S

LICENSE CAN ALSO BE OBTAINED AT: www.ramset.com

LOW VELOCITY POWDER ACTUATED TOOL

Operator's Instruction & Training Manual

• The Ramset HammerShot™ is a light duty tool designed for applications such as

small room additions and basement remodels. Tool life will vary depending on work

site conditions and application.

• The HammerShot™ tool is a low velocity piston type fastening tool. It is designed for

use with Ramset .22 caliber CW powder loads and Ramset fasteners.

• Do not operate the HammerShot™ tool before studying this manual carefully and

thoroughly understanding the material contained herein.

IMPORTANT: The tool warranty is only activated upon receipt by ITW Brands of the

completed Operator's Exam.

Part #00022

MANUAL PRINTED IN CHINA Rev. 09/09

RD v00

GARANTÍA

TODAS LAS GARANTÍAS DE LOS PRODUCTOS DESCRITOS AQUÍ, EXPRESAS

O IMPLÍCITAS, INCLUIDA LA GARANTÍA DE COMERCIABILIDAD E IDONEIDAD

PARA CIERTOS PROPÓSITOS EN PARTICULAR, QUEDAN EXCLUIDAS DE MANERA

ESPECÍFICA, EXCEPTO LO SIGUIENTE: ITW BRANDS REPARARÁ O REEMPLAZARÁ

A SU SOLA DISCRECIÓN CUALQUIER PIEZA DE LA HERRAMIENTA O SUJETADOR

QUE, DENTRO DE UN PLAZO DE 90 DÍAS DESPUÉS DE LA VENTA POR ITW BRANDS,

ESTA COMPAÑÍA ENCUENTRE QUE ESTÁ DEFECTUOSO EN LOS MATERIALES O EN

LA MANO DE OBRA; EL DESGASTE NORMAL QUEDA EXCLUIDO. ÉSTA ES LA ÚNICA

GARANTÍA DE ITW BRANDS Y EL ÚNICO RECURSO A DISPOSICIÓN DEL COMPRADOR.

Para devoluciones bajo garantía, comuníquese con: ITW Brands, Attn: QA Department,

1575 Hunter Road, Suite A, Hanover Park, IL 60133; Teléfono: (877) 489-2726.

NOTA: Es muy importante que el operador de esta herramienta lea y comprenda

completamente el manual de la herramienta completo y conteste el Examen del

Operador de la última página. La garantía no será válida hasta que no se reciba el

examen, junto con una copia del recibo de venta, y hasta que ITW Brands no revise

todo. El permiso de operador también puede obtenerse en: www.ramset.com

PARA EVITAR LESIONES SERIAS O LA MUERTE

El operador y terceras

personas deben

emplear protección

para los ojos y oídos.

Nunca cierre la herramienta con la mano sobre el extremo de

carga de esta herramienta de fijación. Esto puede ocasionar

una lesión grave en la mano causada por la penetración del

pistón o por el disparo de un elemento de fijación.

Lea el manual antes

de operar esta

herramienta.