RAMSET RAM 30 30 Specifications download pdf (Page 6)

www.ramsetinc.com

RAMSET

RAM 30 UL

CLASSES OF VEHICULAR GATE OPERATORS

Vehicular horizontal slide-gate operator (or system) - A vehicular gate operator (or system) that controls

a gate which slides in a horizontal direction that is intended for use for vehicular entrance or exit to a drive,

parking lot, or the like.

Vehicular swing-gate operator (or system) - A vehicular gate operator (or system) that controls a gate

which swings in an arc in a horizontal plane that is intended for use for vehicular entrance or exit to a drive,

parking lot or the like.

Residential vehicular gate operator-Class I - A vehicular gate operator (or system) intended for use at a

home of one-to four single family dwellings, or a garage or parking area associated there with.

Commercial/general access vehicular gate operator-Class II - A vehicular gate operator (or sys-

tem) intended for use in a commercial location or building such as a multi-family housing unit (five or

more single family units), hotels, garages, retail stores, or other buildings serving the general public.

Industrial/limited access vehicular gate operator-Class III - A vehicular gate operator (or system) intended

for use in an industrial location or building such as a factory or loading dock area or other locations not

intended to service the general public.

Restricted access vehicular gate operator-Class IV - A vehicular gate operator (or system) intended for

use in a guarded industrial location or building such as an airport security area or other restricted access

locations not servicing the general public, in which unauthorized access is prevented via supervision by

security personnel.

RECOMMENDED WIRE GAUGE

INPUT POWER MOTOR HP RUN START

120V Single Phase 1/2 4.7 5.0

AMPERE

MAXIMUM CONDUIT DISTANCE IN FEET

USING COPPER WIRE BY WIRE SIZE

14ga. 12ga. 10ga. 8ga.

up to 100' 100-350' 350-650' 800'

NOTE: Always consult and follow all local building and electrical codes prior to installation!

RECOMMENDED ELECTRICAL CONNECTION

For a single operator use a 3 wire, 120 VAC or 220 VAC electrical circuit with a 15 amp independent circuit

breaker. Loop wires and low voltage wires, should use separated conduit!

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

No comments

RAMSET RAM 30 30 Specifications Page 6