DISASSEMBLY
14
DISASSEMBLY
TOOL DISASSEMBLY
1. Remove the screw and lockwasher
from the stop pin cover using the 5/32”
hex wrench provided with the tool.
2. Remove the stop pin cover by lifting
it up and out of the tool housing.
3. Remove the stop pin spring.
4. Remove the stop pin.
5. Slide the barrel assembly out of the
tool housing. Note the alignment of the
slot in the barrel with the stop opening
in the tool housing.
REMOVE STOP PIN COVER,
SCREW & LOCKWASHER
REMOVE STOP PIN COVER
REMOVE STOP PIN SPRING
REMOVE THE STOP PIN
SLIDE THE BARREL OUT OF THE
TOOL HOUSING
Comments to this Manuals